Dynaudio Prices the Confidence i: €15,000 to €35,000 a Pair, On Sale in Europe 24 November

Dynaudio has put numbers on the Confidence i. The Danish brand's updated three-model Confidence range, revealed in July 2026 with prices promised later, now has European pair pricing and an on-sale date: €15,000 for the stand-mounted Confidence 20i including its stands, €25,000 for the Confidence 30i and €35,000 for the Confidence 50i. The figures were published on 6 October 2026 by German magazine connect, which attributes them to its sister title STEREO.

This is a pricing announcement rather than a product debut. The range itself was announced on 21 July 2026, with the three models, the new tweeter and the revised crossover all described at the time — only the money was missing. What has changed this week is that the money has arrived, along with dates.

When you can buy them

Dynaudio's own Confidence i product page and connect agree on the schedule. The Blonde Wood and Ruby Wood High Gloss finishes go on sale in Europe from 24 November 2026, with worldwide availability following in January 2027. The Space High Gloss finish is listed for worldwide release in early 2027.

No prices have been published in pounds, dollars or any other currency. The euro figures above are the only ones Dynaudio or its press channels have put into circulation, and a currency conversion is not a price — regional pricing is set regionally.

Eight years on from the 2018 Confidence

connect frames the Confidence i as Dynaudio developing the Confidence generation it introduced in 2018, "after eight years". That makes this a thorough revision of an existing platform rather than a clean-sheet range, and the changes are concentrated in three places: the tweeter, the waveguide and the crossover.

The tweeter is the new Esotar 3i, a 28mm soft dome with a reworked magnet assembly and a new ferrofluid recipe. Around it sits a redesigned DDC Lens — Dynaudio's Directivity Control waveguide — which on the 30i and 50i is reshaped for wider horizontal dispersion, while the 20i gets a new lens of its own. connect refers to the design as DDC 3.0; Dynaudio's page simply calls it a redesigned DDC Lens.

The crossover has been pared back, with Duelund capacitors and a patent-pending part Dynaudio calls the UltraPrecision Array resistor. The company claims tolerances more than ten times tighter than off-the-shelf components — that is the manufacturer's own figure, not an independently verified one. All three models remain passive; there is no active or powered variant in this range.

What nobody can tell you yet is how any of this sounds. connect is explicit that a listening test would have to establish that, and no published measurements or reviews exist at the time of writing.

The three models

Confidence 20i — a two-way standmount, Esotar 3i plus a single 18cm MSP woofer, crossing over at 3,000Hz. Sensitivity is quoted at 87dB (2.83V/1m) into a 4-ohm load, frequency response 45Hz–27kHz, power handling 250W. Dimensions are 370 x 1130 x 458mm (W x H x D) including the stand, and weight 27kg. connect notes that the stand — included in the €15,000 pair price — forms part of a downward-firing bass-reflex arrangement, so it is structural rather than a furniture accessory.

Confidence 30i — a three-way floorstander with the Esotar 3i, one 15cm MSP midrange and two 18cm MSP woofers, crossing at 320Hz and 2,800Hz. 86dB sensitivity, 4 ohms, 39Hz–27kHz, 350W, 370 x 1385 x 438mm, 44kg.

Confidence 50i — the largest of the three, again three-way, with the Esotar 3i, two 15cm MSP midranges and two 18cm MSP woofers, crossing at 400Hz and 3,000Hz. 88dB sensitivity, 4 ohms, 37Hz–27kHz, 400W, 416 x 1560 x 472mm, 49kg. connect reports that Dynaudio explicitly intends this model for larger rooms, which the cabinet dimensions and the doubled midrange complement bear out.

Read across the three and the pattern is conventional for a range like this: the 50i trades size and cost for a quoted 37Hz bottom end and the highest sensitivity of the trio, while the 20i buys the smallest footprint at the price of 45Hz and the need for the stand it ships with. All three present a 4-ohm nominal load, so amplifier choice is not a trivial afterthought at any point in the range.

The North American question

The timing is hard to ignore. European pricing for the Confidence i lands roughly three months after Dynaudio announced on 7 July 2026, from its Skanderborg headquarters in Denmark, that it would cease commercial operations in North America and close its US subsidiary in Northbrook, Illinois, in autumn 2026. The company said it would focus market development on Europe and Asia, noted that North American sales had actually been growing, and cited ongoing economic challenges and market uncertainty. It also promised a plan for continuity of product support in the region.

How that intersects with the Confidence i is, at present, unaddressed. Dynaudio's "worldwide January 2027" wording is the company's own, and no source we have seen says anything about whether the Confidence i will be sold, distributed, priced or supported in the United States or Canada — nor does any source say it will not be. Readers in those markets should treat the question as open until Dynaudio says otherwise.

For Europe, the picture is clear enough: three passive Confidence models, a new tweeter and crossover, two finishes from 24 November 2026 and a third in early 2027, at €15,000, €25,000 and €35,000 a pair.

This article was written by an AI system from Into The HiFi AI Desk, generated from the following sources, with no human editing pass before publication: connect (German): Dynaudio Confidence i: Neue Lautsprecher starten im November (6 October 2026), Dynaudio — Confidence i product page, The Audiophile Man — Confidence i speakers news from Dynaudio (21 July 2026), PMA Magazine — Dynaudio to cease operations in North America (8 July 2026).